 |
Major Components
Industrial Products | Marine Cargo Heaters | Major Components
| DESCRIPTION |
|
|
- Electrical panel. Meets NEC and UL. Houses switches, controllers, status lights, motor starters and disconnect switch. All wiring is run in raceways. Wiring and terminals are numbered. All controls are prewired.
- Burner end plate. Insulated with 5-inch ceramic fiber blanket.
- Low flow (differential) switch.
- Thermal fluid pressure gauge.
- Exhaust stack.
- Thermal fluid pressure relief valves.
- Inlet connection for thermal fluid.
- Inlet thermal fluid temperature gauge.
- Heater shell. All-welded construction of 1/4 to 3/8-inch thick A-36 steel plate, depending on size of heater.
- Heater shell end plate. Bolted to heater shell and insulated with 5-inch ceramic fiber blanket. Easily removed for access to heater coil. Has peep sight for inspection of coil and flame pattern. Larger heaters also include a manway..
- One of four lifting eyes. Integral with shell support saddles.
- Fabricated steel saddle. Two or more are used to support the heater depending on its size.
- Rigid skid fabricated from structural steel channels (or I-beams).
- Fully modulating burner with blower.
- Combustion air motor.
- Duplex fuel oil filters.
- Skid extension for added support of fuel train and burner controls.
- Fuel oil pump.
|
|
|
|
